What is the safe Exit Sign Light?

Exit Sign Light is set in many public places. It is a necessary safety facility in crowded places. This is so that in the event of an accident, everyone can quickly escape the scene of the accident through the instructions of Exit Sign Light.

Exit Sign Light belongs to the series of fire emergency lights. It has the advantages of reliable work, high stability and long life. It is suitable for high-rise buildings such as factories, hotels, shopping malls, and buildings. Burning plastic lamp holder, with wall-mounted, portable and hanging installation methods. Emergency time ≥90min Fire safety Exit Sign Light has the characteristics of low power consumption, high brightness and long service life. A power switch and finger display light are designed on the side.

1. The installation positions of common double-head fire emergency lighting and Exit Sign Light are generally at the exits of normal exits and emergency passages leading to the outdoors in the building. It is generally installed above the door frame of the evacuation passage door exit, on the wall of the corridor and the safety exit walkway, about 2 meters above the ground.

2. The height of the double-head fire emergency lighting and Exit Sign Light can be about 2.2 meters; it should also be determined according to the actual situation of the place of use. When the space of the place of use is large, the use density of Exit Sign Light will increase. The installation height can be adjusted appropriately; the prerequisites must meet the relevant regulations of the fire inspection and acceptance department.

3. The installation position of the fire emergency light should not be hit by objects. In order to prevent the smoke generated during a fire from affecting the vision, the installation height of the indicator light should be 2.2 to 2.5 meters is the most appropriate. If the installation is too high, it will affect the light effect of the brightness of the light during a power outage, and it will be inconvenient to repair and debug the Exit Sign Light.